I am writing to share the detailed specifications for wood doors to assist with our current project planning. Please see the key requirements and standards summarized below:

Dimensions and Thickness

  - Interior Doors: 1-3/8” thick
  - Exterior Doors: 1-3/4” thick
  - Commercial/Custom: 2-1/4” or thicker
  - Standard Widths: Range from 24” to 48” (typically 1/4” less than nominal to allow for clearances).
  - Standard Heights: 80”, 84”, and 96” (up to 10' for specific wood species like Cherry or Walnut).

Construction and Materials

  - Cores: Solid core options include particleboard or Structural Composite Lumber (SCL).
  - Stiles and Rails: Vertical stiles should be 5–6 inches wide with a minimum 1” laminated hardwood.
  - Veneer: A-grade wood veneers (plain or rotary sliced) over engineered cores.
  - Joints: Doweled or mortise-and-tenon construction.

Performance and Hardware

  - Fire Ratings: Available in 20-, 45-, 60-, and 90-minute ratings.
  - Hardware Prep: Machined for hinges and standard 161 (cylindrical) or 86 edge (mortise) locks.
  - Glazing: Factory-installed glass lite kits (minimum 5”–6” from door edges for fire-rated units).
  - Sustainability: Options for FSC-certified wood and low-VOC finishes.

Please let me know if you need any further clarification on these specifications or special orders.

All frames are Al powder coated with wood finishes.

Best regards,

Jorge Mederos